Cheers! Let's Make 'Em Glow!

TGIF everyone!  I hope you've had a great week!  Today I'm sharing a fun card I created to share on the Chibitronics Instagram page today!  You can check out their feed here.

This is the relatively simple card that I created today featuring the fun "Cocktail Party" stamp set from Catherine Pooler.

And with the fun colored LED stickers... and this puppy lights up... in RAINBOW form!

For my card today, I stamped out my collection of glassware on an A2 card front and and also onto my card base too!  I stamped it using a lighter tan ink for my card base.

Next I used the stencil from the Chibi "Stickers Affects Add-On & Stencil" set and mapped out my entire circuit. For this card I wanted to use the cool "FADE" affects sticker too also from the Chibi "Stickers Affects Add-On & Stencil" set so my lights fade in and out!

Next I began adding the adhesive Copper Tape to the negative line of the circuit. 

I added a few of the "Conductive Fabric Tape Patches" to some of my Copper Tape joints.  This was just to ensure that those junctions were well connected.

Next I added the Copper Tape to the positive side of the circuit.  I had to build a little paper bridge over top of the negative line of tape in between the battery and the "Fade" affect sticker.

The battery area was created with 4 pieces of 3mm Foam Adhesive and a copy-paper flap.  So super simple!

Next I placed on all of my LED Light Stickers.  I used yellow, blue and red from the "Red, Yellow, Blue MegaPack (30)" and the orange and green stickers from the "Pink, Orange, Green MegaPack (30)" package of light stickers. 

I also add the "Fade" affect sticker from the "Stickers Affects Add-On & Stencil" set.

For the finishing touch I added the front card panel with a stamped sentiment to the card base and I also added more 3mm Foam Adhesive all around the edges of the card base.  Instead of building a battery house slider, I made the card front "removable" so you can replace the battery with ease.  The front is just held on by tiny little clear velcro dots in the corners.

And the card is finished!  Now check out what happens when you press that button!!!!

Thanks so much for joining me today!  I hope you too give those LED Light Stickers and Light Affects Stickers a try!

Have a great weekend!

~ Ally ~

 

This post contains affiliate links..